| EN |

Nut D

Nuts are parts that connect mechanical equipment tightly. Through the threads on the inside, nuts and bolts of the same specification can be connected together.

For example, the M4-P0.7 nut can only be connected with the M4-P0.7 series bolt (in the nut, M4 means that the inner diameter of the nut is about 4mm, 0.7

Means that the distance between two threads is 0.7mm); the same is true for American products, for example, 1/4-20 nut can only be matched with 1/4-20 screw

(1/4 means that the inner diameter of the nut is approximately 0.25 inches, and 20 means that there are 20 teeth in every inch).
View:
Wafer Head Connecting Nuts

Wafer Head Connecting Nuts

Insert Nuts-D1042

Insert Nuts-D1042

Top Pivot Housing

Top Pivot Housing

Start Nuts

Start Nuts

T-Bolts

T-Bolts

Cone Seat

Cone Seat

Round Nut Plates

Round Nut Plates

Zinc Tee Nuts

Zinc Tee Nuts

Steel Tee  Nuts

Steel Tee Nuts

Wing Nuts

Wing Nuts

Type B Washer Head Insert Nuts

Type B Washer Head Insert Nuts

Type E Washer Head Insert Nuts

Type E Washer Head Insert Nuts

© 2022 Xhieh Chin Taiwan Head Office/Factory All rights reserved.